 |
 |
|
|
|
|
 |
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Dodge Cummins T-304 and T-409 Stainless
Steel Four Inch System |
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
The
Diesel Performance Parts Dodge Cummins 5.9 diesel exhaust system is designed
to replace the entire factory exhaust system for 2003 and newer model years.
The Diesel Performance Parts system is manufactured of mandrel bent T-304 or
T-409 stainless steel tubing and welded hanger components. T-304 mandrel bent
stainless steel is the industries premium material for exhaust system use, the
best of the best! Every system is packaged to fit any style cab or bed length.
This is accomplished without any cutting, as the tubing is precisely designed
for each body and bed style. |
|
|
|
The Diesel
Performance Parts Dodge Cummins system begins with a four inch T-304 or T-409
stainless steel down pipe, followed by the four inch intermediate pipe. The
Diesel Performance Parts spiral flow muffler is manufactured from T-304 stainless
steel that includes a five inch T-304 mirror polished stainless steel, rolled
edge tip. |
|
|
The
spiral flow louver muffler is a six inch round by thirty inch long T-304 stainless
steel case, containing an inner packing material made of stainless steel wool,
with a ceramic wool outer packing. The interior of the muffler is a one piece
four inch T-304 stainless steel tube that dampens the resonance of diesel exhaust
and still keeps the interior noise level of the cab within three decibels of
the original |
 |
|
|
|
|
|
|
|
|
|
|
factory
sound level. Diesel Performance Parts muffler design uses a spiral flow louver
that is specifically designed for diesel exhaust performance. The spiral pattern
(view picture) of the louvers promotes the same twist the turbocharger introduced
to the exhaust gasses as they left the turbocharger housing. The spiral flow
of the louvers helps speed the exhaust gasses out of the exhaust system to lower
the exhaust gas temperatures as quickly as possible. |
|
|
|
 |
|
|
|
|
The
entire Diesel Performance Parts system uses welded on T-304 stainless steel
hangers to make installation extremely easy. This is also the most secure and
permanent method of mounting, exactly like the original equipment system was
designed. Systems that use clamp on hangers are more difficult and time consuming
to install and generally the system does not hang on the truck as well. Clamp
on style hangers are generally made of mild steel and will rust and fail over
a short period of time, then the system will loosen up and misalign itself.
Diesel Performance Parts welds on T-304 stainless steel hangers whenever possible
to eliminate this problem. The joint clamps provided in our systems are plated
to prevent corrosion and provide a long life. Stainless steel joint clamps can
not be used as the threads of the fasteners will “gall up” when tightened sufficiently
to seal the joints. Stainless steel tubing is extremely hard and the joints
will need to be clamped to a much higher torque value than in a mild steel system.
|
|
|
| |
|
The
tail pipe is a four inch T-304 or T-409 stainless steel mandrel bent tube that
provides the maximum clearance for the suspension and spare tire during installation.
The Diesel Performance Parts five inch rolled edge, polished T-304 stainless
steel tip is designed to help eliminate diesel soot from collecting on your
truck or trailer. Some systems use a chrome plated tip, unfortunately these
tips have a very short life span. The tip is directly behind the rear wheels
and is |
|
 |
|
|
|
|
|
|
|
battered by road debris
causing the chrome-plated tips to begin to rust very quickly but not T-304
stainless steel.
The Diesel Performance
Parts Dodge Cummins system has been dyno tested to provide as much as 24 horsepower
and 53 foot pounds of torque. The average gain is 19 horsepower and 43 foot
pounds of torque. The Diesel Performance Parts system will lower your exhaust
gases by up to as much as 200 degrees, while providing a quicker spool up
time on your turbocharger. There are even fuel mileage gains with our exhaust
system. The mileage gains will vary by individual driving style and location.
Extra power is great, but lower exhaust gas temperatures will allow you to
make other performance modifications to your diesel engine and still keep
the exhaust gas temperatures still at a safe level.
The Diesel Performance
Parts T-304 stainless steel system are protected by their exclusive Limited
Lifetime Warranty, to the original purchaser. The Diesel Performance Parts
T-409 stainless steel systems are protected by their 10 year warranty.
|
|
|
|
|
|
2003+ T-304 Stainless Steel
Dodge Cummins 5.9 (2003 and newer)
2003+ 5.9 Liter, Turbo Back,
T-304 Dual Exhaust, Dual 5 Inch Stainless Steel Tips (2003 and newer)
2003+ 5.9 Liter, Turbo Back,
T-409, 5 Inch, Stainless Steel Tip (2003 and newer)
2003+ 5.9 Liter, Turbo Back,
T-409 Dual Exhaust, Dual 5 Inch Stainless Steel Tips (2003 and newer) |
|
|
|
|
|
Home | About BRC Diesel
Performance | Diesel Performace
Parts | Contact Us
| E-mail
This entire site with its content is copyright protected.
Cummins, Power Stroke Diesel, and Duramax Diesel and other names used
are registered trademarks of other corporations and are not owned
by BRC Diesel Performance. All of the trademarks are used throughout
this web site for identification purposes only. BRC Diesel Performance
is not affiliated with these companies.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|